Thermodynamic Solar Block

Energie

Thermodynamic Solar Solution for central heating

The Thermodynamic Solar System represents high levels of economy and comfort when heating your house. The cutting edge technology used allows you to obtain both high performance and high efficiency. Thanks to the ability of a Thermodynamic System to harness a variety of renewable energy sources such as sun, wind and rain; a Solar Thermodynamic Systems represents the best solution to reducing energy consumption. With no greenhouse gas emissions, Thermodynamic Solar Systems provide a major environmental benefit. A single system can efficiently and effectively provide both the space heating and domestic hot water requirements. You can also use your system to provide central heating during the colder seasons and then switch to the heating of the pool during the warmer months, maximizing your investment.

Thermodynamic Solar Solution for Swimming-pools

The perfect solution for those who want to enjoy their swimming pool all year round with both economic and environmental benefits. With high levels of reliability and efficiency, ENERGIE Thermodynamic Solar Systems are not constrained by the limitations of traditional systems. The system is designed to be maintenance free, thereby reducing running costs. The Thermodynamic Solar System uses a sealed circuit that does not require the periodic addition of fluid. Additionally, the system uses a titanium heat exchanger with very high resistance to the swimming pool chlorine. Needs also less solar panels than traditional systems, being this way more economical and efficient.

List of equipment from the range

Modelo		Solar Block 6	Solar Block 12	Solar Block 16	Solar Block 28	Solar Block 40
Solar Panels	Nº	6	12	16	28	40
Maximum Thermal Power	W	7500	16580	24210	38220	54600
Power Consumption Min.	W	1230	2010	3210	5650	8450
Water Flow	m³/h	0,7	1,0	1,5	3,0	5,0
Pressure Drop	kPa	3,0	9	7	11	36
Electrical Supply	-	1~/ 230V / 50 Hz or 3~/ 400V / 50 Hz \| 3~/ 400V / 50 Hz
Protection (M/T)*	A	16/6	25/10	2x16/16	20	25
Hydraulic Connections	Pol.	1	1	1	1	1
Block Gross Weight	kg	48	96	128	210	320

*Magnetothermic Protection Switch (S, for the Single-Phase version and T for the Three-Phase version) to be fitted by the installer.

Models with all options available Central Heating

Model	N. Panels	Area to be heated*	Cylinder	Electrical Supply
Solar Block 6	6	90 m²	-	230V or 400V
Solar Block 12	12	150 m²	-	230V or 400V
Solar Block 16	16	220 m²	-	230V or 400V
Solar Block 28	28	300 m²	-	400V
Solar Block 40	40	450 m²	-	400V
Solar Block 6 Plus	6	90 m²	200	230V or 400V
Solar Block 12 Plus	12	150 m²	300	230V or 400V
Solar Block 16 Plus	16	220 m²	300	230V or 400V
Solar Block 28 Plus	28	300 m²	500	400V
Solar Block 40 Plus	40	450 m²	500	400V

*Does not relieve the sizing of the solar system according to the building, installation and geographic location.

Models with all available options Heating Swimming-pools

Model	N. Panels	Volume to be heated* (Water Mirror Surface)	Cylinder	Electrical Supply
Solar Block 6	6	16 m²	-	230V or 400V
Solar Block 12	12	40 m²	-	230V or 400V
Solar Block 16	16	60 m²	-	230V or 400V
Solar Block 28	28	120 m²	-	400V
Solar Block 40	40	150 m²	-	400V
Solar Block 6 Plus	6	16 m²	200	230V or 400V
Solar Block 12 Plus	12	40 m²	300	230V or 400V
Solar Block 16 Plus	16	60 m²	300	230V or 400V
Solar Block 28 Plus	28	120 m²	500	400V
Solar Block 40 Plus	40	150 m²	500	400V

*Does not relieve the sizing of the solar system according to the swimming pool, installation and geographic location.

THERMODYNAMIC SOLAR BLOCK

This unit of the Thermodynamic Solar System has the following main components: a low consumption compressor, which is responsible for the circulation of the liquid throughout the whole system, a heat exchanger that dissipates heat into the water for consumption (Domestic Hot Water) or the closed heating circuit (Central Heating and Swimming-pool Heating) and an expansion component that reduces the boiling temperature from approximately –30ºC so that it can go back to the thermodynamic solar panels and capture heat again.

CENTRAL HEATING

CONFORTO E COMODIDADE COM A MÁXIMA ECONOMIA

SUPER EFFICIENT ENVIRONMENT HEATING AT LOW TEMPERATURE
NON-EXISTENT PROGRAMMED MAINTENANCE
POSSIBILITY OF JOINING ALL HOUSE HEATING EQUIPMENT INTO JUST ONE SOLUTION
POSSIBILITY OF ALTERNATING BETWEEN ENVIRONMENT HEATING IN THE COLDER SEASONS AND SWIMMING-POOL HEATING IN THE WARMER SEASONS
ABSOLUTE GUARANTEE OF PRODUCTION OF HOT WATER FOR HEATING AT 55ºC DURING THE WINTER
HIGHLY EFFICIENT SCROLL COMPRESSOR
HIGH QUALITY STAINLESS STEEL PLATES EXCHANGER
FREE OF DEFROST CYCLES
SMALL DIMENSION INDOOR UNIT
CENTRAL HEATING WITHOUT CHIMNEYS AND BURNT GASES, TOTALLY ENVIRONMENTALLY FRIENDLY
WORKS WITH UNDERFLOOR HEATING, RADIATORS, CONVECTORS OR FAN COILS
ELECTRONIC EXPANSION VALVE

SWIMMING-POOL HEATING

HEATED SWIMMING-POOL EVERY DAY OF THE YEAR

SWIMMING-POOL HEATED ALL YEAR ROUND WITH THE LOWEST COST IN THE MARKET
NON-EXISTENT PROGRAMMED MAINTENANCE
POSSIBILITY OF JOINING ALL HOUSE HEATING EQUIPMENT INTO JUST ONE SOLUTION
POSSIBILITY OF ALTERNATING BETWEEN ENVIRONMENT HEATING IN THE COLDER SEASONS AND SWIMMING-POOL HEATING IN THE WARMER SEASONS
HIGHLY-RESISTANT AND DURABLE TITANIUM EXCHANGER
HIGHLY EFFICIENT SCROLL COMPRESSOR
FREE OF DEFROST CYCLES
SMALL DIMENSION INDOOR UNIT
ELECTRONIC EXPANSION VALVE

THERMODYNAMIC SOLAR SYSTEM
OPERATING PRINCIPLE

EQUIPMENT

> Without ducts
> Without ventilators
> Without defrost cycles that use up energy
> Super efficient compressor with low energy consumption
> No need to install support equipment
> Hot water guaranteed, available day and night, hail, rain, wind or shine up to 55ºC

SOLAR PANEL

> Captures heat regardless of climate.
> Primary circuit does not need to dissipate excess heat on hotter days.
> Easy integration with architecture, versatile, no visual impact

The Thermodynamics Solar System joins two incomplete technologies, the heat pump and the solar thermal collector.
Heat pumps are quite efficient equipment but the heat they produce from their renewable component varies only according to changes in the temperature of the environment. Thermal solar collectors are the best source of heat on hot and sunny days but they are totally inefficient whenever there is no sun.
The Thermodynamic Solar Technology manages to surpass the limitations of both the heat pump and solar collector technologies.

Through the cooling liquid (R134a or R407c) which covers a closed circuit, the liquid goes into the solar panel and suffers the action of sun, rain, wind, environment temperature and other climate factors. During this process the liquid gains heat in a more favourable way than a heat pump. After this stage, the heat is transferred to an exchanger with the help of a small compressor, which heats the water. The liquid cools down and the circuit is repeated.

As the fluid has a boiling temperature of approximately -30ºC, the system works even when there is no sun and it even works at night, providing hot water at 55ºC, day and night, hail, rain, wind or shine, unlike the traditional solar thermal system.
The energy consumption of the system is basically the same as a fridge compressor that makes the liquid circulate. There are no ventilators that help the evaporation process, or defrost cycles, which imply unnecessary energy consumption, unlike what happens with heat pumps.

The Solar Block controller is the interface between the equipment and the user. Among other functionalities, it gives access to: